PoE++ Explained: Why Modern Offices Are Sending More Power Through Their Network Cables

200+ Articles published
5 IT topics covered
20+ Years of IT expertise
CE+ Cyber Essentials Plus
Share
In This Article
    Speedster IT
    Want IT That Just Works?

    Unlimited, proactive IT support from a team who answers the phone.

    Explore IT Support

    How Power over Ethernet Is Changing the Way Modern Offices Are Connected

    The humble Ethernet cable is doing considerably more work than it used to.

    Traditionally, businesses installed network cabling primarily to move data between computers, switches, servers and other network equipment. Today, the same structured cabling can also provide electrical power to a growing range of devices across the office. Our Network Cabling & Structured Cabling London team designs cabling with that power in mind, and our UniFi Smart Building Solutions in London & Across the UK show how much of an office can now run over Ethernet.

    Wireless access points, VoIP phones and IP cameras have been powered this way for years. But newer equipment can demand considerably more power, from Wi-Fi 7 access points and advanced security cameras to displays, access-control systems, sensors and smart-building technology.

    That is where PoE++, or higher-power Power over Ethernet, comes in.

    For businesses planning an office refurbishment, network upgrade or new cabling installation, understanding PoE++ is increasingly important. The network cabling being installed today may need to support far more than PCs and phones over its lifetime.

    What Is Power over Ethernet (PoE)?

    Power over Ethernet (PoE) allows electrical power and network data to travel over the same Ethernet cabling.

    Instead of connecting a device separately to:

    • an Ethernet cable for data, and
    • a mains socket or power supply,

    a compatible PoE network can provide both through the network connection.

    What does PoE look like in practice?

    A familiar example is a ceiling-mounted wireless access point.

    Without PoE, the access point may require network connectivity plus a separate electrical supply near its installation position. With PoE, a compatible network switch can deliver both connectivity and power through the Ethernet cable.

    That can make installing devices in ceilings, corridors, reception areas and other awkward locations considerably simpler.

    So, What Is PoE++?

    PoE has evolved to support increasingly power-hungry equipment.

    The main IEEE PoE standards include:

    StandardCommon namePower available from PSE*Typical power at the deviceTypical uses
    IEEE 802.3afPoEUp to 15.4W12.95WVoIP phones, basic cameras
    IEEE 802.3atPoE+Up to 30W25.5WAccess points, cameras, video phones
    IEEE 802.3bt Type 3PoE++Up to 60W51WHigher-performance APs, cameras, smart-building equipment
    IEEE 802.3bt Type 4PoE++Up to 90W71.3WHigher-power networked devices

    *PSE means Power Sourcing Equipment, usually a PoE-capable network switch or injector.

    Actual power available to the device is lower than the maximum supplied by the PSE because some power is lost through the cabling.

    What makes PoE++ different?

    The significant difference with IEEE 802.3bt PoE++ is that it can use all four twisted pairs in an Ethernet cable to deliver power.

    That opens the door to devices that historically would have been impractical to power through structured cabling.

    Is PoE++ backwards compatible?

    Generally, yes. A PoE++ switch can power PoE and PoE+ devices, because each device tells the switch how much power it needs. The reverse isn’t true. A PoE+ switch can’t give a PoE++ device its full power, so the device may not start, or may run with some features switched off.

    Why Are Offices Suddenly Using So Much Power Over Ethernet?

    Walk around a modern London office and consider how many devices are now connected to the network.

    It isn’t just desktop computers.

    Network infrastructure may support:

    • wireless access points
    • IP security cameras
    • VoIP phones
    • door-entry systems
    • intercoms
    • occupancy sensors
    • environmental sensors
    • digital signage
    • meeting-room equipment
    • IoT devices
    • smart-building controllers

    The result is a gradual convergence of IT infrastructure and building infrastructure.

    Instead of installing completely separate power and communications systems for every device, businesses can potentially connect and power more equipment through their structured cabling.

    And that makes the design and quality of the underlying network increasingly important.

    Wi-Fi 7 Is Making Cabling and PoE Even More Important

    This is particularly relevant as organisations begin adopting Wi-Fi 7.

    Wi-Fi might be wireless between the access point and your laptop or phone, but the access point itself normally needs a wired network connection.

    Cisco’s Wi-Fi 7 infrastructure guidance highlights multi-gigabit Ethernet together with PoE+ or higher-power network infrastructure as part of delivering the capabilities of modern access points.

    That means upgrading wireless networking without considering the infrastructure sitting behind it can create an avoidable bottleneck.

    What does the whole connection look like?

    Businesses need to think about the whole connection:

    Switch → structured cabling → access point → wireless device

    A high-performance access point cannot compensate for an unsuitable wired infrastructure feeding it. Our guide Is Your Business Network Cabling Ready for Wi-Fi 7? covers this in more detail.

    PoE++ and the Rise of Smart Offices

    Another driver is the smart building.

    Modern workplaces increasingly contain sensors and connected systems designed to monitor things such as occupancy, equipment utilisation and environmental conditions.

    This creates interesting possibilities.

    For example, Cisco Spaces describes smart-space applications involving Wi-Fi, BLE and UWB location technology, sensors, occupancy analytics and even building-energy optimisation.

    Where might network outlets be needed?

    From a cabling perspective, that changes the conversation.

    Network outlets are no longer necessarily required only beside desks.

    They may be required:

    • in ceilings
    • above doors
    • beside meeting-room displays
    • near cameras
    • throughout communal spaces
    • around access-control points
    • near sensors and IoT devices

    That is why planning structured cabling around what the building might need tomorrow, rather than simply counting today’s desks, can make a significant difference.

    Does PoE++ Mean You Need Cat6A Cabling?

    Not automatically.

    This is where a proper survey is far more valuable than simply assuming every cable needs replacing.

    The appropriate cable depends on factors including:

    • required network speed
    • cable run length
    • PoE power requirements
    • equipment being connected
    • cable bundle size
    • installation environment
    • existing infrastructure
    • future expansion plans

    However, Category 6A is increasingly relevant to higher-performance office networks.

    Panduit’s current technical guidance positions Cat6A as infrastructure capable of supporting 10 Gigabit Ethernet and PoE applications, alongside emerging requirements including smart-building equipment and sensors.

    Cat6A can therefore make considerable sense when designing an infrastructure expected to remain in place for years.

    The cheapest cable today isn’t necessarily the cheapest infrastructure over the lifetime of an office.

    Can PoE++ run over Cat5e and Cat6?

    Yes. PoE++ works over Cat5e, Cat6 and Cat6A up to the standard 100 metre channel. The difference is how well the cable copes with the extra current, especially in large bundles. Thicker conductors, such as those in most Cat6A cable, run cooler and lose less power along the way.

    Can PoE++ Cause Ethernet Cables to Get Hot?

    Yes, which is why PoE should be considered as part of the cabling design rather than simply switched on afterwards.

    Electrical current travelling through the conductors generates heat. With higher-power PoE, particularly when many powered cables are tightly bundled together, temperature becomes an installation consideration.

    Cable construction, conductor size, bundle size, ambient temperature and installation method can all affect performance.

    Work With Speedster IT

    Want IT support that actually works?

    Talk to us about how your IT is supported today, and what a managed IT partner should be taking off your plate.

    Talk to Our Team

    Current PoE deployment guidance consequently emphasises factors including voltage drop, cable heating and cable quality when planning higher-power applications.

    This is one reason professional installation and appropriate cable selection matter.

    PoE++ is not simply a question of buying a powerful PoE switch and plugging everything into it.

    What should businesses avoid?

    • Copper-clad aluminium (CCA) cable: it’s cheaper, but it isn’t solid copper and isn’t suitable for PoE. Always use solid copper cable.
    • Very large, tight bundles of powered cables: they trap heat.
    • Poor terminations: bad connections can overheat under load.
    • Mixing passive PoE with standard PoE: some devices use non-standard “passive” PoE, which can damage equipment if it’s connected to the wrong port.

    Don’t Forget the PoE Power Budget

    There’s another easily overlooked issue: switch capacity.

    A PoE switch can have plenty of Ethernet ports without having enough electrical capacity to power every connected device at its maximum requirement simultaneously.

    That overall allowance is known as the switch’s PoE power budget.

    Can a 24-port PoE switch power 24 devices?

    Imagine a business has 24 PoE devices.

    Simply purchasing a 24-port PoE switch doesn’t automatically mean that switch can provide the required power to all 24 devices concurrently.

    Network design should therefore consider both port capacity and power capacity.

    This becomes increasingly important as higher-powered devices are introduced.

    What happens when the budget runs out?

    Depending on the switch, devices plugged in last may not get power, or lower-priority ports may be switched off. Either way, something stops working, often an access point or a camera. Listing every device’s maximum power draw, adding headroom and setting port priorities avoids this.

    What Devices Can PoE++ Power?

    The precise requirements depend on the equipment manufacturer and model, but higher-power PoE can support applications such as:

    Wi-Fi access points

    Newer enterprise wireless access points may need substantially more power than older generations, particularly as manufacturers add multiple radios, higher performance and additional functionality. Our article on UniFi Enterprise Wi-Fi 7 explains why PoE++ matters for one current range, and our guide to Cisco Meraki MR series access points covers another.

    IP and PTZ security cameras

    Advanced cameras may include motors, infrared illumination, heaters, analytics and other features requiring additional power.

    Access-control equipment

    PoE can simplify installations involving network-connected door entry, intercom and access-control technologies.

    Displays and meeting-room technology

    Some networked displays, conferencing components and related devices can potentially be powered using higher-output PoE technologies.

    Smart-building devices

    Sensors, controllers, IoT gateways and other connected building equipment can increasingly form part of the network infrastructure.

    The important point isn’t that everything should be powered by Ethernet.

    It is that Ethernet has become a viable power source for considerably more equipment than it once was.

    How do I check what a device needs?

    Look at the device’s datasheet. It usually lists the PoE standard (802.3af, at or bt) and the maximum power draw. Plan around the maximum figure, not the typical one.

    What Are the Advantages of PoE++ in an Office?

    Fewer separate power connections

    Providing power through Ethernet can reduce the need to install a separate electrical connection immediately beside every compatible network device.

    More freedom over device placement

    Wi-Fi access points and cameras can be positioned where they perform best instead of simply where a plug socket happens to be located.

    Centralised power

    Devices powered from network switches can potentially benefit from centrally managed power and UPS protection, depending on the network design.

    Easier network management

    Compatible managed switches can provide administrators with visibility and control over connected PoE devices.

    Greater flexibility

    An appropriately designed structured cabling system creates a foundation that can accommodate new technologies as the office changes.

    Should You Replace Existing Cat5e or Cat6 Cabling for PoE++?

    Not necessarily.

    Existing cabling should be assessed rather than condemned based solely on its age or category.

    A suitable cabling survey can establish what is already installed, how it has been terminated and whether the installation performs to the required standard.

    Testing can also reveal problems that aren’t obvious from looking at the cable.

    What should a cabling survey check?

    For businesses planning faster Ethernet, Wi-Fi 7 or higher-power PoE, it is worth evaluating:

    • cable category and manufacturer
    • cable condition
    • permanent link length
    • patch panels and outlets
    • termination quality
    • network-switch capability
    • PoE requirements
    • cable bundling
    • test results
    • expected future bandwidth

    Keeping cabling that meets the requirement can be far more sensible than replacing infrastructure unnecessarily.

    Likewise, designing an expensive network around old cabling that cannot support the planned equipment can prove a false economy.

    What if a device is more than 100 metres away?

    Standard Ethernet and PoE stop at 100 metres. For longer runs you need a switch closer to the device, fibre to a remote switch, or specialist long-range equipment. Our article on UniFi Long-Range PoE Switching: Power Devices up to 800 Metres Away covers one option for cameras and access control.

    Is Cat6A Worth Considering for a New Office Installation?

    For a completely new installation, it deserves serious consideration.

    The Ethernet Alliance’s 2026 Ethernet Roadmap identifies the enterprise move towards 2.5G, 5G and 10GBASE-T, alongside faster connectivity supporting Wi-Fi 7/8 and AI-ready workplaces.

    Structured cabling can remain inside a building much longer than the switches, wireless access points and computers attached to it.

    That changes the economics.

    Saving a relatively small amount on cabling during a refurbishment can become expensive if sections of the physical infrastructure have to be replaced again when network requirements increase.

    The correct answer won’t always be Cat6A, but future capacity should form part of the decision. If you’re moving office, our IT Relocation Services London team can plan the cabling as part of the move.

    Planning PoE++? Start With the Cabling, Not the Gadget

    The most exciting part of a network upgrade is normally the equipment: faster switches, new Wi-Fi access points, security cameras or smart-office technology.

    But every one of those devices ultimately depends on the infrastructure connecting it.

    Before deploying higher-power PoE equipment, businesses should understand whether the existing cabling, patching, switches and power budgets are suitable.

    For a new office or refurbishment, requirements should ideally be considered before the cables go into the walls and ceilings.

    Changing a specification on a drawing is considerably easier than replacing an inappropriate installation afterwards.

    How should we plan PoE++ for our office?

    1. List your devices: access points, cameras, phones, displays and access control, with their power needs.
    2. Plan device positions: where each one goes decides cable lengths and routes.
    3. Choose the cabling: solid copper throughout, with Cat6A for high-power and long runs.
    4. Size the switches: enough PoE++ ports and total power budget, with headroom.
    5. Protect the power: put PoE switches on a UPS so critical devices ride through short power cuts.
    6. Test every link: so problems are found before devices go live.

    Need Network Cabling for Your London Office?

    Whether you’re upgrading wireless infrastructure, installing PoE devices, moving office or planning a completely new network, the first step is understanding what the building and equipment actually require.

    Speedster IT provides network cabling services in London, helping businesses design and install structured cabling for reliable day-to-day performance while considering future network requirements.

    From new Ethernet outlets and office moves to Cat6/Cat6A infrastructure and the cabling behind wireless access points, a properly planned installation gives the technology sitting on top of the network a much stronger foundation.

    Call us on 0204 511 9111, email hello@speedster-it.com, or get in touch to talk through your project.

    Ready to Talk?

    Let’s fix this properly.

    Book a free consultation with one of our engineers and find out what better IT support actually looks like.

    Get In Touch